Loading the FRP paste into the mold

Loading the press, Saraco Industries, Beirut

FRP is glass fiber set in polyester resin. The fiber carries the load; the resin holds it in shape and protects it. A part is several sheets laid in order, and the order is the engineering.

  1. 01Gelcoatthe finished face: colour, UV and weather protection
  2. 02Resin and additives mixbinds the fiber: fillers, flame retardant, pigment
  3. 03Chopped strand matthe glass fiber that carries the load
  4. 04Resin and additives mixwets the mat through from the other side
  5. 05Gelcoatthe second finished face

60 to 80% lighter, by weight

1.5 to 2.0 g/cm³ against steel's 7.85.

8 to 20 kV/mm dielectric strength

The body needs no earthing.

No galvanising, no recoating

The resin is chosen for the environment.

UL 94 V0 with flame-retardant grades

The grade Saraco's enclosures are made to.

Wireless meters read through it

A metal box is a Faraday cage.

Low tooling cost at low volume

Part size is limited by the mold.

Gelcoat and UV-stabilised resin

Holds its surface in direct sun, outdoors.

The glass fiber carries the load

Strength set by the fiber and how it is laid.

Sealed against water and dust

For enclosures installed outdoors.

The same part, three materials.

FRPPainted steelAluminium
Density1.5 to 2.0 g/cm³7.85 g/cm³2.7 g/cm³
CorrosionDoes not rustRusts once the coating is damagedGood, galvanic risk
ElectricalNon-conductiveMust be earthedMust be earthed
Radio signalsTransparentBlockedBlocked
MaintenanceLowRecoat every 5 to 10 yearsLow
WhatsApp